Huskie Commons

The electronics of E-577 (elastic-scattering) FERMI-National Accelerator Lab

Show simple item record

dc.contributor.advisor Newell, Darrell E. en_US
dc.contributor.author Khalil, Ramses en_US
dc.date.accessioned 2016-11-11T16:02:48Z
dc.date.available 2016-11-11T16:02:48Z
dc.date.issued 1979
dc.identifier.uri http://commons.lib.niu.edu/handle/10843/17002
dc.description Missing some pages. en_US
dc.description.abstract What Goes On Roughly (in E577): Something comes down the beam pipe hitting the beam scintillators and something trips off the backward arm ("s" for slow) scintillators. This coincidence is called a B.S. When this happens Roy's LeCroy generates a B.S. strobe (within nanoseconds). Since the s scintillators are closer to the Portakamp than the B scintillators, the s signal is delayed in a length of cable to arrive coincident with the B signal (see later section on "Fast Logic"). This strobe is sent to the backward arm C.R.'s and causes the wire chamber information to be latched up. (In order to make sure that you catch the wire signal at the C. R. input when the B. S. strobe comes, delay the signal from the wire. . amps by running the wire amp signals through a carefully calculated length of delay stripline at the plug in end of the C. R. The width of a pulse that a wire amplifier puts out is about 50 ns. The width of Roys fast logic pulse is about 10 ns, so the B. S. strobe has a little leeway in catching the wire amp. signal. Meanwhile, something goes through the forward arm. It takes about 700 ns. to make this trip one way. The LeCroy decision for a good event, "MASTER RIGGER", comes about 1.5-2 ns after the B.S. strobe. The backward C.R. must hold the wire information for that amount of time. en_US
dc.format.extent 90 pages en_US
dc.language.iso en_US en_US
dc.publisher Northern Illinois University en_US
dc.rights NIU theses are protected by copyright. They may be viewed from Huskie Commons for any purpose, but reproduction or distribution in any format is prohibited without the written permission of the authors. en_US
dc.subject E-577 en_US
dc.subject elastic-scattering en_US
dc.subject FERMI-National Accelerator Lab en_US
dc.title The electronics of E-577 (elastic-scattering) FERMI-National Accelerator Lab en_US
dc.type.genre Dissertation/Thesis en_US
dc.type Text en_US
dc.contributor.department Department of Electrical Engineering en_US
dc.description.degree B.S. (Bachelor of Science) en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search Huskie Commons


Browse

My Account